论文发表情况描述

Ⅰ 什么是论文成果形式描述

本文主要用于科学技术研究及其成果的描述，是研究成果的体现。 此一般结构用于促进结果和信息交换。 结果形式（包括论文，专着，翻译，教科书，奖项）。 一般描述为“名称”，“出版出版物（包括重印情况），出版情况”，“发布时间”，“字数（千字）”，“签名案”。

毕业论文是专科及以上学历教育为对本专业学生集中进行科学研究训练而要求学生在毕业前撰写的论文。一般安排在修业的最后一学年（学期）进行。

(1)论文发表情况描述扩展阅读

不同类型的论文适用于不同发表需求的作者，一般来说，职称论文依旧是发表需求最大的一类论文，晋升职称是很多职场人士的目标，而随着竞争的激烈，发表高水平的职称论文是越来越多的作者的需求。

因此，发表职称论文竞争也是比较激烈的，尤其核心期刊这种级别水平的刊物，热门刊物等到发表的文章可能已经排到了明年。

一些专业度比较高的普刊也是需要排队发表的，只不过需要等待的时间短一些，因此职称论文也好，发表毕业论文也好，作者需要做的就是尽早准备发表工作，不要因为时间的把握影响晋升和毕业。

Ⅱ 丁华锋的论文发表情况

[1] Huafeng Ding*, Weijuan Yang, Peng Huang, Andrés Kecskeméthy, Automatic Structural Synthesis of Planar Multiple Joint Kinematic Chains. ASME Journal of Mechanical Design, 2013, 135(9): 091007-1-12. （、EI检索）
[2] Huafeng Ding*, Peng Huang, Jingfang Liu, Andrés Kecskeméthy, Automatic Structural Synthesis of the Whole Family of Planar 3-DOF Closed Loop Mechanisms. ASME Journal of Mechanisms and Robotics, 2013, 5(4): 041006-1-10. （SCI、EI检索）
[3] Huafeng Ding*, Bin Zi, Peng Huang, Andrés Kecskeméthy, Zhen Huang. The Whole Family of Kinematic Structures for Planar 2- and 3-DOF Fractionated Kinematic Chains.Mechanism and Machine Theory, 2013, 70: 74-90.（SCI、EI检索）
[4] Wenao Cao, Huafeng Ding*, Bin Zi, Zimin Cheng. New Structural Representation and Digital-design Platform for Symmetrical Parallel Mechanisms, 2013, International Journal of Advanced Robotic Systems, 2013, 207(10): 1-11.（SCI、EI检索）
[5] Huafeng Ding*, Weijuan Yang, Peng Huang, Li Ma, Andrés Kecskeméthy, Zhen Huang (2013): Automatic Synthesis of Planar Multiple Joint Kinematic Chains. ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, August 4-7, 2013, Portland, OREGON, USA, DETC2013-12915. （EI检索）
[6] Huafeng Ding*, Wenao Cao, Zimin Cheng, Shipei Zhao, Zhen Huang (2013): Automatic Analysis for the Full-Cycle Mobility of Parallel Mechanisms. ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, August 4-7, 2013, Portland, OREGON, USA, DETC2013-12923. （EI检索）
[7] Zimin Cheng, Huafeng Ding, Wenao Cao, Zhen Huang (2013): Axodes Analysis of the Multi DOF Parallel Mechanisms and Parasitic Motion. ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, August 4-7, 2013, Portland, OREGON, USA, DETC2013-12838. （EI检索）
[8] Huafeng Ding*, Fengmao Hou, Andrés Kecskeméthy, Zhen Huang. Synthesis of the Whole Family of Planar 1-DOF Kinematic Chains and Creation of their Atlas Databases.Mechanism and Machine Theory, 2012, 47(1): 1-15. （SCI、EI检索）
[9] Huafeng Ding*, Wenao Cao, Andrés Kecskeméthy, Zhen Huang, Complete Atlas Database of 2-DOF Kinematic Chains and Creative Design of Mechanisms, ASME Journal of Mechanical Design, 2012, 134(3): 0310061-03100610.（SCI、EI检索）
[10] Huafeng Ding*, Peng Huang, Bin Zi, Andrés Kecskeméthy, Automatic Synthesis of Kinematic Structures of Mechanisms and Robots Especially for those with Complex Structures, Applied Mathematical Modelling, 2012, 36(12): 6122-6131. （SCI、EI检索）
[11] Bin Zi, Sen Qian, Huafeng Ding, Andrés Kecskeméthy, Design and analysis of cooperative cable parallel manipulators for multiple mobile cranes, International Journal of Advanced Robotic Systems, 2012, 9, 207: 1-10. （SCI、EI检索）
[12] Shuxian Xia, Huafeng Ding, Andrés Kecskeméthy. A Loop-Based Approach for Rigid Subchain Identification in Spatial Mechanisms. Advanced Robotic Kinematics, 2012,Accepted.
[13] Huafeng Ding*, Fengmao Hou, Andrés Kecskeméthy, Zhen Huang. Synthesis of a Complete Set of Contracted Graphs for Planar Non-Fractionated Simple-Jointed Kinematic chains with All Possible DOFs. Mechanism and Machine Theory, 2011, 46(11):1588-1600. （SCI、EI检索）
[14] Huafeng Ding*, Andrés Kecskeméthy, Zhen Huang (2011): Atlas Database of 2-DOF Kinematic Chains and its Application to the Creative Design of Mechanisms. ASME 2011 International Design Engineering Technical Conference & Computer and Information in Engineering Conference, August 28-31, 2011, Washington, DC, USA, DETC2011- 47264. （EI检索）
[15] Shuxian Xia, Huafeng Ding, Andrés Kecskeméthy (2011): Rigid Sub chain Identification of Multi-Loop Kinematic Chains with the Method of Kinematical Transformers. Kolloquium Getriebetechnik, September 07-09, 2011, Chemnitz, Germany.
[16] Huafeng Ding*, Jing Zhao, Zhen Huang. Unified Structural Synthesis of Planar Simple and Multiple Joint Kinematic Chains. Mechanism and Machine Theory, 2010, 45(4):555-568.（SCI、EI检索）
[17] Huafeng Ding*, Jing Zhao, Zhen Huang. The establishment of edge-based loop algebra theory of kinematic chains and its applications. Engineering with Computers, 2010, 26(2): 119-127. （SCI、EI检索）
[18] Huafeng Ding*, Jing Zhao, Zhen Huang, Unified topological representation models of planar kinematic chains, ASME Journal of Mechanical Design, 2009, 131(11): 114503.（SCI、EI检索）
[19] Huafeng Ding*, Zhen Huang. Isomorphism Identification of Graphs: Especially for the Graphs of Kinematic Chains. Mechanism and Machine Theory, 2009, 44(1):122-139. （SCI、EI检索）
[20] Huafeng Ding*, Jing Zhao, Zhen Huang. (2009): The Establishment of Novel Structure Representation Models for Several Kinds of Mechanisms. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, San Diego, California, USA, 2009, DETC2009-86074. （EI检索）
[21] Huafeng Ding*, Jing Zhao, Zhen Huang. (2009): Computer-aided Edge Loop Theory of Kinematic Structure of Mechanisms and Its Applications. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, San Diego, California, USA, 2009, DETC2009-86073. （EI检索）
[22] Huafeng Ding*, Zhen Huang. Loop Theory and Applications to Some Key Problems of Kinematic Structure of Kinematic Chains. Frontiers of Mechanical Engineering in China, Higher Ecation Press and Springer-Verlag, 2009, 4(3):276-283.
[23] 丁华锋, 黄真. 平面机构统一拓扑描述模型的建立及其同构判别. 机械工程学报, 2009, 45(3):99-103.（EI检索）
[24] Huafeng Ding*, Zhen Huang, Dejun Mu. Computer-aided Structure Decomposition Theory of Kinematic Chains and Its Applications. Mechanism and Machine Theory, 2008, 43(12):1596-1609. （SCI、EI检索）
[25] Huafeng Ding*, Zhen Huang. Loop Theory of Kinematic Chains and Its Application to Essential Problems of Mechanism Topology. Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Sept. 23~26, 2008, Tianjin, China.
[26] Huafeng Ding*, Zhen Huang. A New Theory for the Topological Structure Analysis of Kinematic Chains and Its Applications. Mechanism and Machine Theory, 2007, 42(10):1264-1279. （SCI、EI检索）
[27] Huafeng Ding*, Zhen Huang. The Establishment of the Canonical Perimeter Topological Graph of Kinematic Chains and Isomorphism Identification. ASME Journal of Mechanical Design, 2007, 129(9): 915-923. （SCI、EI检索）
[28] Huafeng Ding*, Zhen Huang. A Unique Representation of the Kinematic Chain and the Atlas Database. Mechanism and Machine Theory, 2007, 42(6):637-651. （SCI、EI检索）
[29] Sijun Zhu, Zhen Huang, Huafeng Ding. Forward /Reverse Velocity and Acceleration Analysis for a Class of Lower-Mobility Parallel Mechanisms. ASME Journal of Mechanical Design, 2007, 129(4):390-396. （SCI、EI检索）
[30] Zhen Huang, Huafeng Ding. Theory of Loop Algebra on Multi-Loop Kinematic Chains and Its Application. Science in China, 2007, 50(4):437-447. （SCI、EI检索）
[31] 丁华锋, 黄真. 基于环路特性的运动链拓扑图及特征描述的计算机自动生成. 机械工程学报, 2007, 43(11):40-44. （EI检索）
[32] Huafeng Ding*, Zhen Huang. A Unique Matrix Representation for the Kinematic Chain. In: Proceedings of the 12th IFToMM World Congress in Mechanism and Machine Science, June 17-21, 2007, Besançon, French.
[33] Huafeng Ding*, Zhen Huang. Loop-Structure Decomposition of Kinematic Chains, Application to Rigid Sub-Chain Detection. ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, USA, 2007, MECH-34147. （EI检索）
[34] Huafeng Ding*, Zhen Huang. Isomorphism Identification of Graphs of Kinematic Chains.ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, USA, 2007, MECH-34148. （EI检索）
[35] Yi Cao, Zhen Huang, Huafeng Ding. Property identification of singularity loci of Gough-Stewart manipulator. Chinese Journal of Mechanical Engineering (English Edition), 2006, 19(1):41-44（EI检索）
[36] 丁华锋, 黄真, 曹毅. 基于运动链特征描述代码的拓扑图自动生成及其图谱库的建立. 机械工程学报,2006, 42(4):32-36（EI检索）
[37] Cao, Yi, Zhang Qiuju, Zhou Hui and Ding Huafeng. Orientation-Workspace Analysis of the Stewart-Gough Manipulator. Proceedings of the International Conference on Sensing, Computing and Automation, Chongqing, China, Watam Press, May 8-11, 2006, 646-652.
[38] Zhen Huang, Huafeng Ding, Yi Cao. The Novel Characteristic Representations of Kinematic Chains and Their Applications. Proceedings of IDETC/CIE 2005: ASME 2005 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, Long Beach, California, USA,2005, MECH-84282 （EI检索）
[39] Huafeng Ding, Zhen Huang, Yi Cao. The Systemic Research on Loop Characteristics of Kinematic Chains and Its Applications. Proceedings of IDETC/CIE 2005: ASME 2005 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, Long Beach, California, USA,2005, MECH-84283 （EI检索）

Ⅲ 总结中怎么介绍自己的发表的论文

讲讲前人做过哪些方面的贡献，自己在前人的基础上做了哪些方面的研究，同时有哪些方面的缺点等等，基本就是这个思路的，具体的可以看我的头，像的，或者是搜 心，裁，代，写 就可以找到的

Ⅳ 论文发表情况怎么填

把自己曾经发表过被收录的文章蹭蹭蹭的网里边填呀，早发表现在是我们学生群体投稿比较多的一种选择。

Ⅳ 应届生论文发表情况怎么填

大学期间发过就是发过，填上刊物刊期和题目，没发过就写无

Ⅵ 论文成果形式的描述怎么写

论文主要用于科学技术研究及其成果的描述，是研究成果的体现。运用这种通用的结构形式来进行成果推广、信息交流等。

成果形式(包括：论文,专著,译著,教材,获奖)的一般描述："名称","发表刊物(含转载情况),出版情况","发表时间","字数 (千字)","署名 情况","

Ⅶ 招聘表中论文发表情况一栏怎么写

你有发表过期刊论文吗？没有的话，那就不用填写，有的话，你就可以填写你安排的刊物情况三

Ⅷ 攻读学位期间论文发表情况怎么写

这里主要是把你在攻读学位期间发表的论文再论文的后面附录中罗列出来就可以。
注意需要按照文献的格式著名发表的期刊或杂志、日期等

Ⅸ 什么叫做“论文发表情况”

就是是否有发表过论文或和别人合作发表过。有的话把发表的论文列上即可

Ⅹ 论文情况是什么意思

就是你发表论文的详细情况，应该像参考文献一样列出来。