橋梁畢業設計摘要

① 橋梁畢業設計

根據你的要求。。俺給做好吧。。

② 橋梁摘要怎麼寫

請參考以下資料

重慶嘉悅大橋

嘉悅大橋橫跨嘉陵江，因此以「嘉」字命名，嘉悅大橋是重慶市的重點工程項目。東連渝北悅來組團，西接北碚蔡家組團。是重慶市東西交通的重要通道，也是中環快速幹道的主要過江通道。

該工程於2006年12月開工，2010年2月11日通車，總投資7.9億元

嘉悅大橋工程全長9公里，包括三溪口立交、蔡家崗立交、童家岩立交、蔡家崗隧道、嘉悅大橋主橋、悅來互通式立交、張家溪大橋，連接鴛鴦立交處。主橋長約778米，雙向6車道，設計車行時速80公里。

普濟橋
位於蘇州閶門外山塘街，跨山塘河。橋始建於清康熙四十九年（1710年），橋側有普濟堂，因以名橋。為山塘佳景之一。乾隆五十八年（1793年）修，道光二十一年（1841年），1925年重修。1990年又重修。此橋為市區僅存的大型三孔石拱橋，花崗石砌築，南北走向，拱券縱聯分節並列砌築。全長38.69米，中孔凈跨9.16米，矢高4.37米，橋面中寬4.05米。南次孔跨5.31米，矢高2.6米，北次孔跨5.29米，矢高2.54米 。兩端石砌踏步，分別為26級、30級。拱券內壁刻有捐款人姓氏。東西兩面明柱刻有橋。聯句點明了橋所處地理環境和水路走向。現為蘇州市文物保護單位。

③ 橋梁畢業設計 摘要翻譯

你好：
Zhuzhou Shifeng the preliminary design of the bridge (to a row simply supported continuous beam construction program)
Abstract
The design of the bridge is mainly Zhuzhou Shifeng the preliminary design of the upper structure. Zhuzhou Shifeng Bridge to the use of simply-supported method for first after the lifting of prefabricated construction girder into a simply supported beam, and then inter-beam removal of temporary support to form cast-in-place continuous beam, main beam of the use of such a high degree of box girder, span of 30 meters.
The design is composed of eleven chapters, the first chapter for the introction, a brief bad environment surrounding the project, the design requirements, construction methods; chapter for the bridge-and longitudinal and cross-sectional layout; the third chapter for the cross-section geometric properties;第四五六Chapter for the calculation of internal forces and internal forces at the internal force composition; Chapter VII of the estimates for the pre-stressed beam of steel, arranged;第八九chapter for prestressed reinforcement after the loss and the calculation of internal forces; Chapter beam intensity-based check. Chapter XI for the stress, deformation, and other check.
Keywords: prestressed concrete simply supported continuous beam bridge construction for the internal force to the internal force portfolio at pre-camber

④ 道路橋梁工程畢業設計 中英文摘要範例怎麼寫

摘要必須是和你的論文相關，一般在200-500字左右

⑤ 道路橋梁工程技術畢業論文怎麼寫

畢業論文怎麼寫？首先要弄明白作格式，其次是選題，再次是確定立意，最後是材料搜集和寫作。
一、畢業論文格式：
1、標題。首行居中，字型大小一般比正文大兩號。
2、作者。標題下一行，居中，字型大小比標題小一號。
3、摘要。一般100-200字內。字型大小同正文。
4、關鍵詞。即文章核心詞的提煉，能體現文章中心。字型大小同正文。
5、正文。畢業論文字數一般不低於3000字。字型大小5號。
6、參考文獻。
二、畢業論文選題。你可以到網路上搜一搜與你相關的學科論文題目，你會從中獲得很大啟迪。
三、畢業論文立意。你可以在比較中找到別人還沒說到或說得不全面的地方作為自己的立意方向。
四、材料搜集。就是搜集能證明自己立意的素材。可以通過圖書搜集，也可以通過網路查找。
五、畢業論文寫作。要注意格式正確，用語規范，條理清晰，論證充分。

⑥ 求助畢業設計摘要翻譯(有關橋的)

Abstract
The bridge is located in Suzhou, Kunshan Development Zone, is one of a bridge on the road, single-span of 20 metres, poor geological conditions, the split with the central highway to three meters, is designed to sub-sites.
This design is divided into the upper structure design. The lower part of the structure and design of two major parts.
Superstructure design, first determine the type of bridge, structural design, the choice of beam layout and positioning, the bridge is used in assembly-prestressed concrete simple hollow plate girder bridge, followed has been set in accordance with the structural design and calculation with Tendons. Including the section size, the calculation of the sketch identified, calculation methods, load, the calculation of internal forces and internal forces drawn map, influence line, bending envelope from the map, and so on.
The lower part of the design of the structure, identified as buried-rigid foundation for expanding abutment design, the basis of checking to meet the design requirements.
Finally the use of CAD drawing will be designed and constructed for the construction of reinforced that.
Key words: Span, sub-sites, hollow boards, prestressed, the upper part of structural design, design abutment.